-When the cover presses on the pin, the LED turns off, and when the cover opens, the LED turns on. -There is 15 cm cabling on the product as standard. -Cable size specific to the project can be made.
PIR Sensor Circuit
-The LEDs turn on when motion is detected, and when motion is stopped, the LEDs automatically turn off after 30 seconds. -The detection distance is about 3 meters. -There is 15 cm cabling on the product as standard. -Cable size specific to the project can be made.
IR Distance Sensor
-It turns the LED on and off with a hand sweeping motion from a distance of 7 cm. -Project-specific cabling can be made. -Surface and Recessed application can be done.
Mirror Touch
-For products such as wood back, mirror back, glass back, plexi back up to 5 mm
is applied. -Touchable for turning on and off LED products that work with 12/24VDC.
is used. -You can use 220VAC demisters or lights on a single phase.
It is used for opening and closing by touch. -There is a 15 cm cable on the product. -Cable lengths specific to the project can be made.
Anti-Fog Controller
-It is applied on mirror back and glass back products up to 5 mm. -You can use 220VAC demisters or lights on a single phase.
It is used for opening and closing by touch. -There is a 15 cm cable on the product. -Cable lengths specific to the project can be made.
Wired Illuminated-Non-Illuminated Touch Circuit
-Lightless touch circuits can be applied to metals such as screw caps to turn on LEDs.
performs the shutdown operation. -Illuminated touch circuits enable LED products to be used touch-sensitive.
It is used for opening and closing purposes. -There is 15 cm cabling on the product. -Project-specific cabling can be made.
Products